Showing posts with label gas equipment. Show all posts
Showing posts with label gas equipment. Show all posts

Friday, February 3, 2012

Gas Equipment: Explore Online Forums and Portals to Get an Added Advantage

Gas welding is well and alive even today! The most important equipment for any welder is gas equipment, number of factors make it essential equipment while welding. Here in this blog, we will be unfolding some things which make you use gas equipment safely! What will you do once you are done with welding gas equipment; below are the points to be kept in mind!

First and foremost is “handling and storage”; once you finish with gas welding, always keep oxygen and gas cylinders within minimum of 20 feet distance, else you can also divide two equipments with a right firewall. Second would be – we all know that, cylinders can catch fire easily, keep delicate and flammable items away while welding.

You can keep store cylinders away from heat, physical injure etc. Maintaining cylinders on time is always advisable so keep them covered and steady while welding with gas equipment. Make sure that valves of cylinders are closed properly; regulators should always be placed safely. Let’s unveil some general tips on welding equipment safety:

- Use proper equipments to lift gas equipments such as Oxy/Acetylene, hose connectors, trolleys

- Always check suitable tools with torch, so that you can see dust properly, and find easy to clean welding gas equipment.

- Keep checking hoses regularly, and if needed replace the bad ones.

- Ensure about leakage in gas equipment, to avoid hazards.

Once you are done with welding gas equipment:

  • Close cylinder valves.
  • Take pressure off regulators by bleeding the lines
  • Be careful with coil hoses.
  • Restore equipment.

Wednesday, January 25, 2012

Few Basic Components of Gas Welding Equipment

The use of gas welding started as early as the middle 1800's where a mixture of Oxygen and Hydrogen were used to produce a hot flame that was used in the making of jewelry. It was only in the late 1890's when the gas Acetylene started to be used in the gas welding and all the gas welding equipment or the gas equipment that we have today was developed on the basis of this breakthrough. Oxy-Acetylene gas equipment is portable, less expensive and more versatile than a electric welding set up. By using the proper tips, rods and fluxes, almost any metal can be welded, heated or cut using the Oxy-Acetylene process.

Oxy-acetylene welding equipment in Sydney is made up of few basic components. These are as follows:

· Cylinders – Oxygen and Acetylene

Oxygen and Acetylene are stored under pressure in steel cylinders. They are sized by the cuft. of either Oxygen or Acetylene that they hold.

· Welding Hoses for Gas Equipment

Welding hoses are double line rubber structures that are used to connect the cylinder regulators and torch. Double line hose is known as type VD. The Oxygen line is green in color and the fuel line is red.

· Regulators

Regulators are important components of any gas welding equipment or gas equipment as they regulate the pressure of Oxygen and Acetylene flowing from the cylinders. There are basically two types of regulators, single-stage and two-stage.

· Check Valves

They prevent the back flow of the combustion fuel to the cylinders.

· Flash Back Arrestors

This is another safety device, which is a part of any standard welding equipment in Sydney.

· Torches

The place where the combustion happens and the flame is ignited.

· Welding and Cutting Tips – Acetylene Tips

Mounted at the end of the torch and the hole size determines what type and kind of metal it can weld.

· Cutting Attachment and Cutting Torch

Used for heavy duty metal cutting after welding.

· Welding Goggles and Gloves

The default and recommended safety equipment which are part of any gas equipment.